AR Smart Bus RRS Futaba S-Bus/S Bus2

Pacific RC Jets



26 fully assignable and programmable outputs

 Download the SmartBus manual from this link

Looking at that next big project and wondering how you’re going to power all those servos, the RRS system is equipped with 26 fully programmable outputs , all via the single S-Bus output on your Futaba RX. Each channel is freely assignable to any input and can be reversed and matched to any other channel on the Smart Bus. Building that next giant scale model. Smart Bus has got it covered.

Easy to Use

Smart Bus comes with pre configured channel mapping that matches your radio so model setup is really simple. Of course for advanced setups all 26 channels can freely assigned to any transmitter channel.  

SBus2 telemetry ready

Smart Bus RRS gives you live feedback of both your batteries on your radio. Monitor the voltage and capacity used out of each of your batteries at any time during the flight. Ensure your batteries are ready for the next flight.

The Next standard in servo Matching.
In the RC industry precision is key. How can you expect to be precise when no two servos are identical, giving you varied results no matter how well you mechanically match them. Match your servos across 15 individual points, with 8000 step resolution and you can finally achieve matched perfection on your elevators, flaps, multi-engines and more. Take the hassle out of your new setup and have a model that raises your skills.

Sub-trim and reverse on all outputs
Ever spent hours, mechanically matching servos and never being able to get them just right or had to use a separate channel on your receiver, just to reverse a servo. With our intuitive and simple setup you can easily sub-trim at the centre and end-points of all your outputs on the Smart Bus. Using Smart Bus you can individually reverse your servos at a touch of a button. Smart bus gives you ultimate power at your fingertips.

Regulated voltage gives you precise, repeatable, results.

It is hard to be the best with a model that changes. With our high powered 220A regulator FETS we remove the change and give you pure constant regulation. As batteries are used their voltage drops, changes in voltage mean changes in speed and power of your servos. Regulating ensures your model is the same time after time.

RRS - Redundant Receiver technology

Smart Bus RRS is the safest in signal sharing technology, the redundant receiver system ensures your model by utilising two S-Bus/S-Bus2 receivers. unlike other power systems Smart Bus reads signal from both receivers at all times and runs an intelligent algorithm to select the best signal.

In the unlikely event that a receiver fails then Smart Buss switches to the better receiver in less than one signal frame to ensure you will have constant control of your model. Reliability is key with models today, with our redundant receiver system you can ensure your model is always reporting back to you.

With Smart Bus all receiver events are recorded and remain even when powered down so you can review receiver health and signal strength between flights. 

Vibrant colour touch screen display.

Gone are the days of fiddly buttons and rotating dial frustrations, no more bind plugs and small screw drivers needed. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.



*Redundant Receiver system – works with dual or single receiver system

*S-Bus2 telemetry ready

*26 fully programmable and assignable channels
* Works with single or dual battery configuration.
* Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD.
* Full Dual Battery Redundancy - If one battery fails the other battery takes full control..
* Screen 2.4inch diagonal touch screen with 64k colour
* Screen case dimensions 3.4 x 2.0 x 0.5 inches (86 x 50 x 12)mm
* Smart Bus dimensions 4.2 x 3.0 x 0.9 inches (107 x 78 x 23)mm
*Vibrant Colour touch Screen
*Triple regulator design with dual 100A power regulator FETS.
*Multi-match technology.

The next generation of switch technology has arrived.

The Remote Fob Switch allows effortless switching with battery backer technology and fail safe switching all in one convenient hidden switch.

Simple, sleek, slim

No longer do you need to cut wholes in your model and mount big bulky switches on the side. The Remote FOB switch is an internal switch with a remote receiver onboard. Using the quad button FOB switch you can simply and easily swich your model on and off. No need to bend over and fiddle around with mechanical switches. The Remote Fob switch solves all these issues.


Intelligent Battery Backer technology:

The remote Fob switch has our innovative battery backer technology onboard, giving you dual battery redundancy with every flight. The switch intelligence monitors both RX batteries, drawing power for the one with the most charge.


Fail Safe Design

The circuitry inside the remote backer Switch is designed to fail safe into the ON position so if power is temporarily disconnected or an open circuit happens then battery backer switch will supply all availble power so you can bring your expensive model home.


It works with your system

With our huge range of input and output options, the remote Fob Switch can be used with any battery and any receiver system on the market. Simply plug the switch between your batteries and your RX or power system. giving you effortless switching with any combination.


Works seemlesly with the following products:

* Advanced Radio IM22 and IM14.

* Advanced Radio power expanders.

* All Power Box Systems power expanders.

* Smart Fly power expanders.

* Emcomtec power expanders.

* All Futaba Receivers.

* All JR Receivers.

* All Jeti Receivers.

* All  Graupner Receivers.

* All  HiTec Receivers.

* All Spektrum Receivers including power safe receivers.